12V Dc Electric Bike Motor 1000W 3000W Aluminum Electric Bicycle
This is a 12V DC motor unit listed for electric bicycle use, shipped as a component rather than a complete bike, and the specification table's 13.98 × 11.71 × 13.7 cm envelope with a sub-2.6 kg gross weight describes exactly that kind of compact drive assembly. It suits builders working on low-voltage projects, friction or chain drives, and small experimental platforms who are willing to verify electrical limits themselves. The trade-off is that a 12V platform carries very high current for the wattage the title claims, so the battery, its BMS and the cabling become the binding constraint long before the motor does.

At a glance
- The listing's only voltage figure is 12V DC in the title, and the spec table has no voltage field, so confirm the nameplate before you size a pack.
- At 12V, 1000W implies roughly 83A and 3000W roughly 250A, so treat those title figures as current-draw questions for your battery and BMS.
- Gross weight under 2.6 kg and a 13.98 cm cube envelope point to a motor, so budget separately for controller, throttle, display and mounting.
- MOQ is 1 pcs at $500.00 per piece with 3000 pieces monthly supply ability, which lets you sample one unit before committing to a build.
Trade terms
- Minimum Order
- 1 pcs
- Price
- $500.00/Pieces >=1 Pieces
- Supply Ability
- 3000 Piece/Pieces per Month
Full specifications
Supplier listing data has been normalised into one reference table. Values are shown as listed; confirm every field in the final quotation and specification sheet.
| Parameter | Listing value |
|---|---|
| Certification | EEC |
| Model Number | EM-01 |
| Usage | Electric Bicycle |
| Length*width*height (cm) | 13.98*11.71*13.7 |
| Gross Weight (kg) | <2.6 |
| Material | Aluminum |
| Length*width*height | 13.98*11.71*13.7 |
| Gross weight | <2.6 |
| custom made | accept |
What it is & who it is for
A 12V DC drive changes the order in which you specify a build. On a 48V platform the motor is usually the first decision and the pack follows; here the pack, its BMS and its cabling set the ceiling before the motor does anything. The specification table gives you a model number, an aluminium housing, a sub-2.6 kg gross weight and a 13.98 × 11.71 × 13.7 cm envelope, which is enough to plan a mount but not enough to plan a battery. Treat the voltage and wattage in the page title as claims to verify against the nameplate, and design the electrical side around measured values rather than headline numbers.
Current, not voltage, is what you will spend your time managing. A 12V rail delivering 1000W draws about 83A, and 3000W draws about 250A, both of which sit far outside the comfortable continuous range of ordinary ebike connectors, thumb throttles and 14 AWG loom. That means short, thick conductors, a BMS whose continuous discharge rating exceeds the controller's limit, and a fuse sized to the cable rather than to the motor label. If those numbers sound impractical for your build, the honest conclusion is that the 12V figure in the title deserves a second question before you buy.
Charging routine and realistic range both follow from watt-hours, and watt-hours are small at 12V. A 12Ah pack holds about 144Wh and a 20Ah pack about 240Wh; at an easy 20Wh/km assist level that is roughly 7 km and 12 km respectively before losses, hills or headwind. Charging is chemistry-specific: lead-acid wants a three-stage profile and should not be left discharged, while lithium wants a CC/CV charger matched to the pack and a BMS that balances the cells. Ask which chemistry the motor's intended controller expects before you buy either.
Key specs explained
- Model Number: EM-01
- EM-01 is the only identifier the table provides, and it matters more than usual because the title describes a power range rather than a single build. Ask the supplier to confirm that one EM-01 part number covers both the 1000W and 3000W variants, or whether those are separate SKUs with separate nameplates. A model number that maps to two different electrical ratings is a sourcing risk: your spare-parts order, your controller settings and your documentation should all refer to the same rating. Record the exact rating printed on the unit you receive.
- Certification: EEC
- The table lists EEC as the certification entry, but a certification entry on a listing is not the same as a certificate for the unit in your hand. Certification depends on the actual product model and target market. Ask for the certificate number, the issuing body, and the exact model and rating it covers, then check whether the scope matches the voltage and wattage you intend to run. If the certificate covers a different variant, treat it as a starting point for a conversation rather than as proof for your build.
- Material: Aluminum
- An aluminium housing helps with heat spreading and keeps the sub-2.6 kg gross weight plausible, but aluminium tells you nothing about the stator, magnets, bearings or winding insulation inside. For a 12V motor running at very high current, heat is generated in the windings and in the controller, not only in the shell. Ask about the insulation class and whether the housing is sealed against water and dust, because an open aluminium shell on a wet commuter build is a short service life. The material is a starting point, not a performance guarantee.
- Gross Weight: <2.6 kg
- The gross weight figure is written as less than 2.6 kg, which is a ceiling rather than a measured value, and it is described as gross rather than net. That distinction matters: gross weight usually includes packaging, so the motor itself may be lighter. A sub-2.6 kg drive unit suits a bracket-mounted build and keeps the vehicle's sprung mass low, but it also suggests a compact motor that will not shed heat as readily as a larger one. Weigh the unit when it arrives and compare it with the declared ceiling.
- Dimensions (cm): 13.98 × 11.71 × 13.7
- The envelope is roughly 14 cm in each direction, which is a motor or gearbox footprint, not a bicycle frame. Plan your mount around that cube plus clearance for cables, a chain or belt line, and the controller, which the table does not include. Before ordering, ask for a drawing that shows shaft diameter, shaft length, bolt-hole pitch, and which face is the mounting face. A 14 cm cube is easy to fit in principle and surprisingly awkward in practice once a pulley and a connector are attached.
- Title claim: 12V DC, 1000W / 3000W
- This is where the listing is internally inconsistent. The specification table has no voltage field and no power field; the only 12V, 1000W and 3000W figures come from the page title. At 12V, 1000W is about 83A and 3000W is about 250A, so the two figures describe very different electrical systems. Trust the nameplate on the unit you receive and the controller's rated current over the title. If the nameplate says something else, the nameplate wins.
- MOQ and price: 1 pcs at $500.00/Pieces
- A minimum order of one piece at $500.00 per piece is a sampling-friendly structure, but the price needs context before you treat it as a motor price. Ask whether the $500 covers the motor alone or ships with a matching controller, throttle, harness or display; a bare motor at that price and a complete drive kit at that price are different propositions. Because the table lists no controller, assume the motor alone unless the supplier confirms otherwise in writing.
- Supply Ability: 3000 pieces per month
- A stated 3000 pieces per month indicates a supplier set up for volume, which is useful if you intend to move from a sample to a batch. It says nothing about the lead time for your specific order, and it says nothing about whether the 1000W and 3000W variants are stocked in the same proportion. Ask what the sample lead time is, separately from the production lead time, and ask whether the monthly figure applies to one variant or to the model family as a whole.
- Custom made: accepted
- Custom-made acceptance usually means the supplier will discuss housing, shaft, connector, winding or branding changes, but it does not define minimum quantities, tooling charges, or who owns the drawing. For a 12V high-current motor, the most valuable customisation is often the connector and cable gauge, because those are the parts most likely to fail first. Put the electrical interface, the mounting interface and the shaft dimensions in a drawing and have the supplier sign it back before any custom order.

What to compare before you buy
- A 12V DC platform and a 48V platform deliver the same wattage at very different currents; 48V keeps current low enough for ordinary connectors, while 12V pushes you toward heavy cable and a high-current BMS.
- The title's 1000W and 3000W variants are not interchangeable builds; at 12V they imply roughly 83A and 250A, so the battery, BMS, fuse and wiring must be specified per variant rather than assumed.
- The sub-2.6 kg gross weight describes a drive unit, not a rideable bicycle; a complete ebike weighs many times more, so budget for frame, wheels, battery, controller and brakes separately.
- An aluminium housing resists corrosion and spreads heat, but a steel or cast-iron housing of the same rating may tolerate higher continuous load; choose based on duty cycle and mounting, not on material alone.
- One piece at $500.00 lets you sample, while the stated 3000 pieces monthly supply ability suits batch purchasing; confirm what the unit price includes before comparing it with a kit price from another supplier.
Common mistakes
- Reading the title's 1000W or 3000W as continuous rated power. The table supplies no power field, so ask for a nameplate photo and a rated-current figure before you size a controller or a battery.
- Building a 12V pack from small cells without checking the BMS continuous discharge rating. At 83A or more, a BMS rated for 30A will trip or overheat long before the motor reaches its claimed output.
- Using standard ebike connectors and 14 AWG wiring on a 12V high-current run. Voltage drop and connector heating are the usual failure points, and they appear as intermittent cut-outs rather than as an obvious fault.
- Assuming the $500.00 price buys a complete drive kit. The table lists no controller, throttle or display, so confirm the bill of materials in writing before you plan the rest of the build.
Buying checklist
- Request a nameplate photo showing voltage, rated current, rated power and model, so the title claims can be checked against the actual unit.
- Confirm the continuous and peak current ratings of the controller you intend to pair with the motor, and keep the BMS above the controller limit.
- Ask whether the $500.00 unit price includes a controller, harness, throttle, fuse and mounting bracket, and get the answer in writing.
- Confirm battery chemistry, nominal voltage and Ah capacity, then calculate watt-hours and expected range before ordering the pack.
- Ask for a dimension drawing with shaft diameter, shaft length and bolt-hole pitch, and check it against your existing mount.
- Request the EEC certificate scope and confirm it covers the exact model and rating you are buying; certification depends on the actual product model and target market.
Frequently asked questions
Is this a complete electric bicycle or a motor unit?
The specification table describes a component, not a bicycle. Its 13.98 × 11.71 × 13.7 cm envelope and sub-2.6 kg gross weight are consistent with a compact motor or gearbox, and the table lists no frame, wheels, battery, controller or brakes. The page title also uses the word motor. Plan the build as a motor purchase and budget separately for the controller, battery, throttle, display, wiring and mounting hardware, unless the supplier confirms in writing that a kit is included.
Can a 12V battery really deliver 1000W or 3000W?
It can deliver the power in short bursts, but the current is the problem. At 12V, 1000W needs about 83A and 3000W needs about 250A, and those figures sit well above the continuous rating of typical ebike cells, connectors and switches. A pack built from high-discharge cells, a BMS rated for the current, and short thick cables can support it, but a nominal 12V system built from ordinary 18650 cells will sag badly. Confirm the actual rated current on the nameplate before designing the pack.
What battery specification should I pair with this motor?
Start from the rated current on the nameplate, not the title. Choose a pack whose BMS continuous discharge rating exceeds the controller's continuous current by a comfortable margin, and choose cells whose datasheet discharge rating supports that current. Capacity then sets range: at 12V, 12Ah gives about 144Wh and 20Ah about 240Wh. Chemistry matters too, because lead-acid tolerates high current but is heavy, while lithium is lighter but needs a BMS and a matched charger. Ask the supplier which chemistry the intended controller expects.
How should I charge a 12V pack for this motor?
Charging follows chemistry, not the motor. A 12V lead-acid pack needs a three-stage charger with bulk, absorption and float stages, and it should be recharged after every ride rather than left flat. A 12V lithium pack needs a CC/CV charger set to the correct full voltage and a BMS that balances the cells. Match the charger's current to the pack's stated charge rate, and do not use a car battery charger on a lithium pack. Ask the supplier for the recommended charge voltage and current in writing.
What range can I realistically expect?
Range is arithmetic before it is anything else. Multiply nominal voltage by Ah to get watt-hours, then divide by your consumption in Wh/km. At 12V, a 12Ah pack gives about 144Wh and a 20Ah pack about 240Wh; at an easy 20Wh/km that is roughly 7 km and 12 km before losses, hills, headwind or throttle-only use. A 12V high-current system also suffers more voltage sag, which reduces usable energy. Treat any range figure you calculate as a ceiling rather than a promise.
Does the EEC entry mean the motor is approved for road use?
A certification entry on a listing is not the same as an approval for your build. Certification depends on the actual product model and target market. Ask for the certificate number, the issuing body, and the exact model and rating it covers, then check whether the scope matches the voltage and wattage you intend to run and the market you intend to sell into. If the certificate covers a different variant, treat it as a conversation starter rather than as proof for your specific configuration.
Why does the table not list voltage or wattage?
The table lists certification, model number, usage, dimensions, gross weight, material and custom-made status, but it has no voltage or wattage field. The only 12V, 1000W and 3000W figures appear in the page title. That is a common listing pattern and it is not fatal, but it means the electrical specification must be confirmed separately. Ask the supplier to send a nameplate photo and a rated-current figure, and treat those as the authoritative values for your battery, controller and wiring design.
What does the $500.00 per-piece price include?
The table does not say, and that is the point to clarify before ordering. A single-piece price of $500.00 could cover a bare motor, or it could cover a motor with a matching controller and harness; the two are very different purchases. Ask for a bill of materials at that price, including whether a controller, throttle, display, fuse and mounting bracket are in the box. Because the specification table lists no accessories, assume the motor alone until the supplier confirms the scope in writing.
